<?xml version="1.0" encoding="UTF-8" ?>
<feed xmlns="http://www.w3.org/2005/Atom">
<link href="https://www.parkflieger.eu/elektronik?sAtom=1" rel="self" type="application/atom+xml" />
<author>
    <name>Parkflieger RC Modellbau Shop</name>
</author>
<title>&#x45;&#x6C;&#x65;&#x6B;&#x74;&#x72;&#x6F;&#x6E;&#x69;&#x6B;</title>
<id>&#x73;&#x68;&#x6F;&#x70;&#x77;&#x61;&#x72;&#x65;&#x2E;&#x70;&#x68;&#x70;&#x3F;&#x73;&#x56;&#x69;&#x65;&#x77;&#x70;&#x6F;&#x72;&#x74;&#x3D;&#x63;&#x61;&#x74;&#x26;&#x73;&#x43;&#x61;&#x74;&#x65;&#x67;&#x6F;&#x72;&#x79;&#x3D;&#x35;&#x30;&#x33;&#x26;&#x73;&#x52;&#x73;&#x73;&#x3D;&#x31;</id>
<updated>2026-06-09T12:11:50+02:00</updated>
    
        <entry>
            <title type="text">CC3D Board Flugkontroller für Racecopter</title>
            <id>https://www.parkflieger.eu/cc3d-board-flugkontroller-fuer-racecopter?c=503</id>
            <link href="https://www.parkflieger.eu/cc3d-board-flugkontroller-fuer-racecopter?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    OpenPilot CC3D Flight Controller Das CC3D Board ist ein All-in-One-Board, auf dem die OpenPilo t-Firmware läuft. Es kann zur Steuerung von Flächenmodellen, Helikoptermodellen und natürlich Multicoptern genutzt werden.Die Konfiguration und die Überwachung der Flüge kann mit Hil...
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                OpenPilot CC3D Flight Controller Das CC3D Board ist ein All-in-One-Board, auf dem die OpenPilo t-Firmware läuft. Es kann zur Steuerung von Flächenmodellen, Helikoptermodellen und natürlich Multicoptern genutzt werden.Die Konfiguration und die Überwachung der Flüge kann mit Hilfe der Software OpenPilot Ground Control Station (GCS) erledigt werden. Das Board hat viele Gemeinsamkeiten mit der Revolution-Plattform, einschließlich der OpenPilot Architektur und der Cross-Plattform-Ground Control Station (GCS). Das CopterControl vom OpenPilot Projekt stellt eine neue Generation von Mehrzweck-Flugzeug-Stabilisierung Plattformen dar. Die CopterControl Plattform wurde von Grund auf entwickelt, um die folgenden Funktionen bereitzustellen: • eine Multirotor-Steuerung mit Auto-Level, einschließlich TriCopter, QuadCopter und HexaCopter. • eine Flybarless Hubschrauber Steuerung mit Auto-Level. • einen UAV-Controller für Flächenmodelle. Die CopterControl Hardware hat folgende Eigenschaften: • Leistungsstarke STM32 32-Bit-Mikrocontroller mit 90MIPs - 128KB Flash und 20KB RAM • 3-Achsen-Hochleistungs-MEMS-Gyros und 3-Achsen-Hochleistungs-MEMS-Beschleunigungsmesser • Kleine (36mmx36mm) 4-Schicht-Platine für überlegene elektrische Rauschunterdrückung und Flugleistung. • Software-Unterstützung für Windows, Mac und Linux • Direkte USB-Unterstützung keine Treiber erforderlich, ein echtes Plug-and-Play-Gerät. • Spektrum Satellitenempfänger Unterstützung • Futaba S-BUS-Unterstützung • Innovative Flexi-Port-Technologie • 4 MBits On-Board-EEPROM zu speichern von Einstellwerten • Unterstützt verschiedene Eingänge: 6 PWM Kanäle, PPM, Spektrum/JR DSM2, DSMJ, DSMX Satelliten-, und Futaba S.Bus Empfänger • Unterstützung für Mehrempfängeranschluss • MainPort -Funktionen (einstellbar): serielle Telemetrie (Standard), GPS, S.Bus, Spektrum/JR Satelliten • FlexiPort (einstellbar): serielle Telemetrie, GPS, Spektrum/JR Satelliten, oder I2C Peripherie (in Entwicklung) • 10 PWM Ausgänge für Servos oder ESC&#039;s, oder für Kamera Stabilisierung • Kamera Stabilisierung: 3 – Achsen Unterstützung mit manueller Steuerung über separatem Empfänger • On-board USB Anschluss für einfache Verbindung und Einstellung • USB und serieller Telemetrie und Konfiguration (einschließlich Wireless mit optionalem Funkmodul) Über folgende Links finden Sie Informationen für die Einstellungen des CC3D Board: https://wiki.openpilot.org/display/WIKI/CopterControl+-+CC3D+-+Atom+Hardware+Setup https://wiki.openpilot.org/display/WIKI/CC+-+CC3D+-+Atom++LED+Indications Quelle: https://wiki.openpilot.org Openpilot ist eine Open Source Software.
            ]]>
            </content>
            <updated>2015-09-11T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">BEC-Regler UBEC 3A 2-6s</title>
            <id>https://www.parkflieger.eu/bec-regler-ubec-3a-2-6s?c=503</id>
            <link href="https://www.parkflieger.eu/bec-regler-ubec-3a-2-6s?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-09-03T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">BEC-Regler UBEC 5A 3-10s</title>
            <id>https://www.parkflieger.eu/bec-regler-ubec-5a-3-10s?c=503</id>
            <link href="https://www.parkflieger.eu/bec-regler-ubec-5a-3-10s?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-09-03T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">BEC-Regler UBEC 8A 2-3s</title>
            <id>https://www.parkflieger.eu/bec-regler-ubec-8a-2-3s?c=503</id>
            <link href="https://www.parkflieger.eu/bec-regler-ubec-8a-2-3s?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-09-03T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">Step-down Voltage Regulator for UBEC</title>
            <id>https://www.parkflieger.eu/step-down-voltage-regulator-for-ubec?c=503</id>
            <link href="https://www.parkflieger.eu/step-down-voltage-regulator-for-ubec?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-09-03T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Mini BEC 6V 10A für 2-6s LiPo</title>
            <id>https://www.parkflieger.eu/skyrc-mini-bec-6v-10a-fuer-2-6s-lipo?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-mini-bec-6v-10a-fuer-2-6s-lipo?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    Das Super BEC von SkyRC mit seinen kompakten Abmessungen von 23x23x15mm ist in einem wasserdichten Aluminiumgehäuse untergebracht. Mit dem großen Eingangsspannungsbereich von 6-25 Volt bzw 2-6 Zellen LiPo und einem hohen Ausgangsstrom von 10 Ampere gehört es zu den leistungsfä...
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                Das Super BEC von SkyRC mit seinen kompakten Abmessungen von 23x23x15mm ist in einem wasserdichten Aluminiumgehäuse untergebracht. Mit dem großen Eingangsspannungsbereich von 6-25 Volt bzw 2-6 Zellen LiPo und einem hohen Ausgangsstrom von 10 Ampere gehört es zu den leistungsfähigsten BEC am Markt. Technische Daten: Eingangsspannung: 6-25.2 Volt DC Ausgangsstrom: 10 Ampere Ausgangsspannung: 6 Volt +/- 0.1V Temperaturschutz Gewicht: 30g Abmessungen: 23x23x15mm
            ]]>
            </content>
            <updated>2015-02-08T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Dual Leistungs BEC LiPo 2s Ausgang 5.2V 5A, 5.2V 10A</title>
            <id>https://www.parkflieger.eu/skyrc-dual-leistungs-bec-lipo-2s-ausgang-5.2v-5a-5.2v-10a?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-dual-leistungs-bec-lipo-2s-ausgang-5.2v-5a-5.2v-10a?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-02-08T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Leistungs BEC LiPo 2s Ausgang 5.2-7.4V 10A</title>
            <id>https://www.parkflieger.eu/skyrc-leistungs-bec-lipo-2s-ausgang-5.2-7.4v-10a?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-leistungs-bec-lipo-2s-ausgang-5.2-7.4v-10a?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-02-08T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">Flight Control FC451 für 250 FPV Quadcopter 3 Axis Gyro und</title>
            <id>https://www.parkflieger.eu/flight-control-fc451-fuer-250-fpv-quadcopter-3-axis-gyro-und?c=503</id>
            <link href="https://www.parkflieger.eu/flight-control-fc451-fuer-250-fpv-quadcopter-3-axis-gyro-und?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    Der FC451 Flight Controller wurde speziell für die neuen FPV Raceopter 200-300mm optimiert. Er besitzt einen 3 Achsen Gyro und einen 3-Achsen Beschleuningungssensor. Im Gegensatz zu den Open Source Systemen ist der FC451 ohne Computer ganz einfach einzustellen.
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                Der FC451 Flight Controller wurde speziell für die neuen FPV Raceopter 200-300mm optimiert. Er besitzt einen 3 Achsen Gyro und einen 3-Achsen Beschleuningungssensor. Im Gegensatz zu den Open Source Systemen ist der FC451 ohne Computer ganz einfach einzustellen.
            ]]>
            </content>
            <updated>2015-01-17T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">Alkaline 1,5V, AA Mignon Zellen (8 Stück)</title>
            <id>https://www.parkflieger.eu/alkaline-1-5v-aa-mignon-zellen-8-stueck?c=503</id>
            <link href="https://www.parkflieger.eu/alkaline-1-5v-aa-mignon-zellen-8-stueck?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-01-17T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">FC150 Flight Control System</title>
            <id>https://www.parkflieger.eu/fc150-flight-control-system?c=503</id>
            <link href="https://www.parkflieger.eu/fc150-flight-control-system?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2015-01-17T00:00:00+01:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Optischer Tachometer für Helikopter 400-4500 U/min</title>
            <id>https://www.parkflieger.eu/skyrc-optischer-tachometer-fuer-helikopter-400-4500-u/min?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-optischer-tachometer-fuer-helikopter-400-4500-u/min?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    Optical Tachometer It is a must have tool for any pilot, and can measure RPM of any rotating object, such as all kinds of helicopters, fixed-wing airplanes with propellers and multi-copters. With high accuracy, fast response, compact size, ergonomic design and easy operation, ...
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                Optical Tachometer It is a must have tool for any pilot, and can measure RPM of any rotating object, such as all kinds of helicopters, fixed-wing airplanes with propellers and multi-copters. With high accuracy, fast response, compact size, ergonomic design and easy operation, this Optical Tachometer makes pilots have more fun! How it works As we know when the flashing frequency of 3D Glass Screen is the same as the RPM of a rotating object, if we view the rotating object through the 3D Glass Screen, the rotating object is &quot;static&quot;. At this time, the flashing frequency of 3D Glass Screen is the RPM of this rotating object. When we view the rotating blades through the 3D Glass Screen, if the blades is&quot;static&quot;, the flashing frequency displayed in the LCD is the RPM of this blades. Applied for all kinds of helicopters, fixed-wing airplanes with propellers and multi-copters. 5 presets of Flashing Frequency/RPM The RPM range that the Optical Tachometer could test is from 700RPM to 4500RPM. In order to make it convenient for you to enter close RPM and find out the exact RPM in a short time, 5 presets of RPM can be saved in this unit and you could enter any preset by pressing &quot;F&quot; key. Each preset RPM value can be set according to your different helicopters and airplanes, and also the last RPM value before shutting off will be saved as preset. 10 Level aperture adjustment As the back light of the rotating object is quite different, there are 10 levels of aperture which can be set by pressing &quot;F&quot; key. In this case,you could capture clear image through the 3D Glass Screen whether the light is bright or dark, so that you can get accurate RPM value of the rotating object. Technical Data: RPM Range: 700-4500RPM Accuracy: ±1RPM Power supply: CR2032 button battery Weight: 45g 10 level aperture adjustment 5 preset RPM value Rotary dial for RPM value adjustment LCD display
            ]]>
            </content>
            <updated>2014-08-04T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Digitale Pitch Lehre LCD Anzeige</title>
            <id>https://www.parkflieger.eu/skyrc-digitale-pitch-lehre-lcd-anzeige?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-digitale-pitch-lehre-lcd-anzeige?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    Digital Pitch Gauge The digital pitch gauge is designed for application in model helicopters and serves to measure the rotor blade pitch value.The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed through LCD screen, providing a simp...
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                Digital Pitch Gauge The digital pitch gauge is designed for application in model helicopters and serves to measure the rotor blade pitch value.The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed through LCD screen, providing a simple and precise way of measuring pitch angle. Features Large LCD for easy reading Up to 700 mm blades (Suitable for 250 to 700 size helicopters) Fast and accurate measurement Zero function Auto rotating display Auto power-off (Power shuts down after 20 minutes without any movement) How to use Press &quot;POWER&quot; button for about two seconds to turn on the power. For correct pitch measurements,DPG-010 digital pitch gauge must be zeroed before being used. Press &quot;ZERO&quot; button once to zero the gauge.Please refer to the below instruction to understand how to use DPG-010. After using, Press &quot;POWER&quot; button for about two seconds to turn off. Zero The Gauge Place the DPG-010 horizontally leveled with top of helicopter frames. Press〝ZERO〞to zero the gauge. Measure The Pitch Mount the DPG-010 on main blade to measure the pitch. Technical Data: Body Dimension: 113x56x14mm Suitable blade width: 20mm~75mm Detectable pitch range: ±90° Temperature: 0~40°C Resolution: 0.1° Current consumption: 2.8mA Battery: CR2032 Lithium X2 Weight (including battery): 40g Aluminium blade clamp
            ]]>
            </content>
            <updated>2014-08-04T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">SkyRC Digitale Pitch Lehre Micro LCD Anzeige</title>
            <id>https://www.parkflieger.eu/skyrc-digitale-pitch-lehre-micro-lcd-anzeige?c=503</id>
            <link href="https://www.parkflieger.eu/skyrc-digitale-pitch-lehre-micro-lcd-anzeige?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    DPG-020 Digital Pitch Gauge The World&#039;s Smallest Digital Pitch Gauge, A Must Have for Pilots This Micro Digital Pitch Gauge is the world&#039;s smallest electronic Digital Pitch Gauge, designed for small helicopters (up to 450 class) and serves to measure the rotor blade pitch valu...
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                DPG-020 Digital Pitch Gauge The World&#039;s Smallest Digital Pitch Gauge, A Must Have for Pilots This Micro Digital Pitch Gauge is the world&#039;s smallest electronic Digital Pitch Gauge, designed for small helicopters (up to 450 class) and serves to measure the rotor blade pitch value. It is powered by one piece of CR2032 Lithium battery and allows blades from 15mm to 35mm. The built in digital gyroscopic sensor is capable of detecting pitch angle ±90°, with result displayed through LCD screen, providing a simple and precise way of measuring pitch angle. Features Small size &amp; Light weight Large LCD for easy reading Up to 450 size helicopter Fast and accurate measurement with a precision of 0.1° Zero function Auto rotating display Auto power-off (Power shuts down after 5 minutes without any movement) Simply install it on the blade, power it on and the pitch of the blade will display in the LCD screen. With this digital pitch gauge, you could adjust the helicopter rotor blades with a precision of 0.1° in 1 second. Shortest time spent, best result got. Technical Data: Body Dimension (LxWxH): 44 x 37,2 x 14mm Suitable blade width: 15mm~35mm Detectable pitch range: ±90° Temperature: 0~40°C Resolution: 0.1° Current consumption: 4.5mA Battery: CR2032 Lithium X1 Weight: (including battery) 20g
            ]]>
            </content>
            <updated>2014-08-04T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">AccuRC spare lead</title>
            <id>https://www.parkflieger.eu/accurc-spare-lead?c=503</id>
            <link href="https://www.parkflieger.eu/accurc-spare-lead?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2014-08-04T00:00:00+02:00</updated>
        </entry>
    
    
        <entry>
            <title type="text">AccuRC Hitech Din adapter</title>
            <id>https://www.parkflieger.eu/accurc-hitech-din-adapter?c=503</id>
            <link href="https://www.parkflieger.eu/accurc-hitech-din-adapter?c=503"/>
            <summary type="html">
            <![CDATA[
                
                                    
                            ]]>
            </summary>
            <content type="html">
            <![CDATA[
                
            ]]>
            </content>
            <updated>2014-08-04T00:00:00+02:00</updated>
        </entry>
    
</feed>
